430cd080f3
- updated snapserver.conf - allow wifi bandwith of 40MHz - add debug messages (disabled by default) Signed-off-by: Karl Osterseher <karli_o@gmx.at>
177 lines
7.3 KiB
Plaintext
177 lines
7.3 KiB
Plaintext
###############################################################################
|
|
# ______ #
|
|
# / _____) #
|
|
# ( (____ ____ _____ ____ ___ _____ ____ _ _ _____ ____ #
|
|
# \____ \ | _ \ (____ || _ \ /___)| ___ | / ___)| | | || ___ | / ___) #
|
|
# _____) )| | | |/ ___ || |_| ||___ || ____|| | \ V / | ____|| | #
|
|
# (______/ |_| |_|\_____|| __/ (___/ |_____)|_| \_/ |_____)|_| #
|
|
# |_| #
|
|
# #
|
|
# Snapserver config file #
|
|
# #
|
|
###############################################################################
|
|
|
|
# default values are commented
|
|
# uncomment and edit to change them
|
|
|
|
# Settings can be overwritten on command line with:
|
|
# "--<section>.<name>=<value>", e.g. --server.threads=4
|
|
|
|
|
|
# General server settings #####################################################
|
|
#
|
|
[server]
|
|
# Number of additional worker threads to use
|
|
# - For values < 0 the number of threads will be 2 (on single and dual cores)
|
|
# or 4 (for quad and more cores)
|
|
# - 0 will utilize just the processes main thread and might cause audio drops
|
|
# in case there are a couple of longer running tasks, such as encoding
|
|
# multiple audio streams
|
|
#threads = -1
|
|
|
|
# the pid file when running as daemon
|
|
#pidfile = /var/run/snapserver/pid
|
|
|
|
# the user to run as when daemonized
|
|
user = root
|
|
# the group to run as when daemonized
|
|
group = root
|
|
|
|
# directory where persistent data is stored (server.json)
|
|
# if empty, data dir will be
|
|
# - "/var/lib/snapserver/" when running as daemon
|
|
# - "$HOME/.config/snapserver/" when not running as daemon
|
|
datadir = /overlay/work/snapserver/config.json
|
|
|
|
#
|
|
###############################################################################
|
|
|
|
|
|
# HTTP RPC ####################################################################
|
|
#
|
|
[http]
|
|
# enable HTTP Json RPC (HTTP POST and websockets)
|
|
#enabled = true
|
|
|
|
# address to listen on, can be specified multiple times
|
|
# use "0.0.0.0" to bind to any IPv4 address or :: to bind to any IPv6 address
|
|
# or "127.0.0.1" or "::1" to bind to localhost IPv4 or IPv6, respectively
|
|
# use the address of a specific network interface to just listen to and accept
|
|
# connections from that interface
|
|
#bind_to_address = 0.0.0.0
|
|
|
|
# which port the server should listen to
|
|
#port = 1780
|
|
|
|
# serve a website from the doc_root location
|
|
# disabled if commented or empty
|
|
doc_root = /usr/share/snapserver/snapweb
|
|
|
|
# Hostname or IP under which clients can reach this host
|
|
# used to serve cached cover art
|
|
# use <hostname> as placeholder for your actual host name
|
|
#host = <hostname>
|
|
|
|
#
|
|
###############################################################################
|
|
|
|
|
|
# TCP RPC #####################################################################
|
|
#
|
|
[tcp]
|
|
# enable TCP Json RPC
|
|
#enabled = true
|
|
|
|
# address to listen on, can be specified multiple times
|
|
# use "0.0.0.0" to bind to any IPv4 address or :: to bind to any IPv6 address
|
|
# or "127.0.0.1" or "::1" to bind to localhost IPv4 or IPv6, respectively
|
|
# use the address of a specific network interface to just listen to and accept
|
|
# connections from that interface
|
|
#bind_to_address = 0.0.0.0
|
|
|
|
# which port the server should listen to
|
|
#port = 1705
|
|
#
|
|
###############################################################################
|
|
|
|
|
|
# Stream settings #############################################################
|
|
#
|
|
[stream]
|
|
# address to listen on, can be specified multiple times
|
|
# use "0.0.0.0" to bind to any IPv4 address or :: to bind to any IPv6 address
|
|
# or "127.0.0.1" or "::1" to bind to localhost IPv4 or IPv6, respectively
|
|
# use the address of a specific network interface to just listen to and accept
|
|
# connections from that interface
|
|
#bind_to_address = 0.0.0.0
|
|
|
|
# which port the server should listen to
|
|
#port = 1704
|
|
|
|
# source URI of the PCM input stream, can be configured multiple times
|
|
# The following notation is used in this paragraph:
|
|
# <angle brackets>: the whole expression must be replaced with your specific setting
|
|
# [square brackets]: the whole expression is optional and can be left out
|
|
# [key=value]: if you leave this option out, "value" will be the default for "key"
|
|
#
|
|
# Format: TYPE://host/path?name=<name>[&codec=<codec>][&sampleformat=<sampleformat>][&chunk_ms=<chunk ms>]
|
|
# parameters have the form "key=value", they are concatenated with an "&" character
|
|
# parameter "name" is mandatory for all sources, while codec, sampleformat and chunk_ms are optional
|
|
# and will override the default codec, sampleformat or chunk_ms settings
|
|
# Non blocking sources support the dryout_ms parameter: when no new data is read from the source, send silence to the clients
|
|
# Available types are:
|
|
# pipe: pipe:///<path/to/pipe>?name=<name>[&mode=create][&dryout_ms=2000], mode can be "create" or "read"
|
|
# librespot: librespot:///<path/to/librespot>?name=<name>[&dryout_ms=2000][&username=<my username>&password=<my password>][&devicename=Snapcast][&bitrate=320][&wd_timeout=7800][&volume=100][&onevent=""][&nomalize=false][&autoplay=false][¶ms=<generic librepsot process arguments>]
|
|
# note that you need to have the librespot binary on your machine
|
|
# sampleformat will be set to "44100:16:2"
|
|
# file: file:///<path/to/PCM/file>?name=<name>
|
|
# process: process:///<path/to/process>?name=<name>[&dryout_ms=2000][&wd_timeout=0][&log_stderr=false][¶ms=<process arguments>]
|
|
# airplay: airplay:///<path/to/airplay>?name=<name>[&dryout_ms=2000][&port=5000]
|
|
# note that you need to have the airplay binary on your machine
|
|
# sampleformat will be set to "44100:16:2"
|
|
# tcp server: tcp://<listen IP, e.g. 127.0.0.1>:<port>?name=<name>[&mode=server]
|
|
# tcp client: tcp://<server IP, e.g. 127.0.0.1>:<port>?name=<name>&mode=client
|
|
# alsa: alsa://?name=<name>&device=<alsa device>[&send_silence=false][&idle_threshold=100][&silence_threshold_percent=0.0]
|
|
# meta: meta:///<name of source#1>/<name of source#2>/.../<name of source#N>?name=<name>
|
|
source = pipe:///tmp/snapfifo?name=default
|
|
|
|
# Default sample format
|
|
sampleformat = 44100:16:2
|
|
|
|
# Default transport codec
|
|
# (flac|ogg|opus|pcm)[:options]
|
|
# Type codec:? to get codec specific options
|
|
codec = flac
|
|
|
|
# Default source stream read chunk size [ms]
|
|
#chunk_ms = 20
|
|
|
|
# Buffer [ms]
|
|
# WROOM (modules with no static RAM)
|
|
buffer = 900 # this is on the edge of the possible for 44100:16:2,
|
|
# you'll probably get some memory allocation errors
|
|
# which most certainly will be audible as clicks.
|
|
# You will want to set this a bit lower, please experiment yourself.
|
|
# WROVER (modules with static RAM)
|
|
#buffer = 1000 # you'll have more than enough RAM to go even higher
|
|
|
|
# Send audio to muted clients
|
|
#send_to_muted = false
|
|
#
|
|
###############################################################################
|
|
|
|
|
|
# Logging options #############################################################
|
|
#
|
|
[logging]
|
|
|
|
# log sink [null,system,stdout,stderr,file:<filename>]
|
|
# when left empty: if running as daemon "system" else "stdout"
|
|
#sink =
|
|
|
|
# log filter <tag>:<level>[,<tag>:<level>]*
|
|
# with tag = * or <log tag> and level = [trace,debug,info,notice,warning,error,fatal]
|
|
filter = *:error
|
|
#
|
|
###############################################################################
|